? semiconductor components industries, llc, 2012 february, 2012 ? rev. 8 1 publication order number: mur1620ctr/d mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G switchmode power rectifier these state ? of ? the ? art devices are designed for use in negative switching power supplies, inverters and as free wheeling diodes. also, used in conjunction with common cathode dual ultrafast rectifiers, makes a single phase full ? wave bridge. features ? common anode dual rectifier (8.0 a per leg or 16 a per package) ? ultrafast 35 nanosecond reverse recovery times ? exhibits soft recovery characteristics ? high temperature glass passivated junction ? low leakage specified @ 150 c case temperature ? current derating @ both case and ambient temperatures ? epoxy meets ul 94 v ? 0 @ 0.125 in ? complement to mur1620ct and murb1620ct common cathode device ? esd ratings: ? machine model = c (> 400 v) ? human body model = 3b (> 16,000 v) ? nrvu prefix for automotive and other applications requiring unique site and control change requirements; aec ? q101 qualified and ppap capable ? all packages are pb ? free* mechanical characteristics: ? case: epoxy, molded ? weight: mur1620ctr: 1.9 grams (approximately) murb1620ctr: 1.7 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. ultrafast rectifier 16 amperes, 200 volts 1 3 2, 4 http://onsemi.com d 2 pak case 418aj marking diagrams u1620r = device code kak = diode polarity a = assembly location y = year ww = work week g = pb ? free package ayww u1620rg kak see detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. ordering information to ? 220ab case 221a style 7 ayww u1620rg kak to ? 220ab d 2 pak
mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G http://onsemi.com 2 maximum ratings (per leg) rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 200 v average rectified forward current (rated v r , t c = 160 c) per leg per total device i f(av) 8.0 16 a peak repetitive surge current (rated v r , square wave, 20 khz, t c = 140 c) per diode i fm 16 a non ? repetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 100 a operating junction and storage temperature range t j , t stg ? 65 to +175 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. thermal characteristics (per leg) characteristic symbol value unit thermal resistance, junction ? to ? case r jc 2.0 c/w thermal resistance, junction ? to ? ambient (d 2 pak) r ja 45 c/w electrical characteristics (per leg) characteristic symbol value unit maximum instantaneous forward voltage (note 1) (i f = 8.0 amps, t c = 25 c) (i f = 8.0 amps, t c = 150 c) v f 1.2 1.1 v maximum instantaneous reverse current (note 1) (rated dc voltage, t c = 25 c) (rated dc voltage, t c = 150 c) i r 5.0 500 a maximum reverse recovery time (i f = 1.0 amp, di/dt = 50 amps/ s) t rr 85 ns 1. pulse test: pulse width = 5.0 ms, duty cycle 10%. ordering information device package shipping ? mur1620ctrg to ? 220 (pb ? free) 50 units / rail murb1620ctrg d 2 pak ? 3 (pb ? free) 50 units / rail murb1620ctrt4g d 2 pak ? 3 (pb ? free) 800 / tape & reel NRVUB1620CTRT4G d 2 pak ? 3 (pb ? free) 800 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G http://onsemi.com 3 dc figure 1. typical forward voltage (per leg) v f, instantaneous voltage (volts) 0 0.6 0.4 0.8 30 0.1 0.3 0.2 2.0 1.0 100 20 7.0 3.0 0.5 5.0 50 v r , reverse voltage (volts) 060 40 100 120 500 1000 0.1 0.05 0.02 10 5 2 200 50 20 100 t j = 175 c 20 80 200 figure 2. typical reverse current* (per leg) t c , case temperature ( c) 140 150 0 4.0 2.0 6.0 10 8.0 14 12 180 figure 3. current derating, case (per leg) 0.7 10 70 1.0 1.4 1.2 100 c t j = 175 c 25 c 160 180 140 1 0.5 0.2 100 c 25 c 160 170 16 rated v r applied square wave 0.2 150 c r jc = 2 c/w 0.01 150 c * the curves shown are typical for the highest voltage device in the voltage grouping. typical reverse current for lower voltage selections can be estimated from these same curves if v r is sufficiently below rated v r . i r , reverse current ( a) i f(av) , average forward current (amps) i f , instantaneous forward current (amps) 0 4.0 2.0 4.0 6.0 8.0 0 8.0 12 16 i f(av) , average forward current (amps) figure 4. power dissipation (per leg) t j = 175 c dc square wave 2.0 6.0 10 14 10 12 14 16 p f(av) , average power dissipation (watts)
mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G http://onsemi.com 4 0.01 0.02 0.05 0.1 0.2 0.5 1.0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, time (ms) figure 5. thermal response d = 0.5 0.05 single pulse p (pk) t 1 t 2 duty cycle, d = t 1 /t 2 z jc(t) = r(t) r jc d curves apply for power pulse train shown read time at t 1 t j(pk) ? t c = p (pk) z jc(t) 0.1 0.01 r(t), transient thermal resistance (normalized) figure 6. thermal response, junction ? to ? ambient pulse time (sec) 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 0.001 r(t) ( c/w) 0.01 0.1 1 10 100 50% duty cycle 20% 10% 5% 2% 1% single pulse 1000 0 200 100 300 1.0 10 100 v r , reverse voltage (volts) figure 7. typical capacitance (per leg) c, capacitance (pf) 400 500 600 700 800 900 0.1 0.2 0.3 0.5 0.7 0.2 0.3 0.5 0.7 20 30 50 70
mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G http://onsemi.com 5 package dimensions d 2 pak ? 3 (to ? 263, 3 ? lead) case 418aj issue a dim min max min max millimeters inches d 0.330 0.380 8.38 9.65 e 0.380 0.420 9.65 10.67 a 0.160 0.190 4.06 4.83 b 0.020 0.039 0.51 0.99 c2 0.045 0.065 1.14 1.65 e 0.100 bsc 2.54 bsc a1 0.000 0.010 0.00 0.25 c 0.012 0.029 0.30 0.74 l 0.070 0.110 1.78 2.79 h 0.575 0.625 14.60 15.88 l2 ???? 0.070 ???? 1.78 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: inches. 3. chamfer optional 4. dimensions d and e do not include mold flash. mold flash shall not exceed 0.005 per side. these dimensions are measured at the outermost extremes of the plastic body at datum h. 5. thermal pad contour is optional within dimensions e, l1, d1 and e1. 6. optional mold feature e1 0.245 ???? 6.22 ???? l1 ???? 0.066 ???? 1.68 d1 0.260 ???? 6.60 ???? l3 0.010 bsc 0.25 bsc m 08 08 e d h l1 b e a1 b h l m detail c seating plane a 2x m a m 0.10 b c2 c a b seating plane detail c view a ? a side view top view e2 l2 a a view a ? a e1 d1 l1 optional constructions l3 gauge plane note 3 m a m 0.10 b *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. recommended 0.366 0.100 dimensions: inches pitch 2x 0.653 0.063 2x 0.436 0.169 soldering footprint* note 6
mur1620ctrg, murb1620ctrg, NRVUB1620CTRT4G http://onsemi.com 6 package dimensions to ? 220 case 221a ? 09 issue ag notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. dimension z defines a zone where all body and lead irregularities are allowed. dim min max min max millimeters inches a 0.570 0.620 14.48 15.75 b 0.380 0.405 9.66 10.28 c 0.160 0.190 4.07 4.82 d 0.025 0.036 0.64 0.91 f 0.142 0.161 3.61 4.09 g 0.095 0.105 2.42 2.66 h 0.110 0.161 2.80 4.10 j 0.014 0.025 0.36 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.15 1.52 n 0.190 0.210 4.83 5.33 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.15 1.39 t 0.235 0.255 5.97 6.47 u 0.000 0.050 0.00 1.27 v 0.045 --- 1.15 --- z --- 0.080 --- 2.04 b q h z l v g n a k f 123 4 d seating plane ? t ? c s t u r j style 7: pin 1. cathode 2. anode 3. cathode 4. anode on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. sc illc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems in tended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scill c and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding th e design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resa le in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 mur1620ctr/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loca l sales representative
|
